this article presents fire protection methods for wooden structures used in the construction of buildings and structures, as well as the advantages and disadvantages of these methods. Also, a constructive method of fire protection for the rafter system used to construct the roof of a building is presented.
In this article, the application of increasing the durability of modified asphalt concrete formed by the addition of polymers and surface-active structure-forming additives to asphalt pavements under the influence of the main parameters related to the increase in brittleness and deformation at low temperatures is shown. shown.
In this research, the strength and deformation states of thin plates made of two-layer composite materials are presented. The first layer of two layer thin plates consists of metal or reinforced concrete layers, the thickness of which is much higher than the thickness of the second composite layers. Layers differ in physical and mechanical properties and thicknesses and are made of metal or reinforced concrete materials
This article describes the formulas, calculation procedures and calculation methods given in the European, Japanese, Russian, and American standards for the calculation of the first and second group of limit states in the design of concrete structures with composite reinforcement. Also, the main hypotheses, principles and limit values of structures in the calculation of structures with composite reinforcement are mentioned.
The summary of this article is that, in order to apply the technology and material of construction constructions, which are popular abroad, to the construction in our Republic, choosing the type suitable for the conditions of Uzbekistan, calculating multi-space monolithic media on a theoretical basis, and currently in our Republic. To prove that it is competitive with existing constructions in terms of assembly technology.
The article examines the prospects for the development of material resource management in construction using modern information technologies and digital tools. The analysis showed that existing methods of managing material resources have their advantages and disadvantages, but their effectiveness can be improved by using modern information technologies and digital tools for project and resource management. However, for this it is necessary to develop and implement appropriate regulatory documents and train construction company personnel to use new tools for managing material resources.
The article analyzes the application of lime waste (sludge) to foam concrete and the results of the study of the thermal insulation of lime waste foam concrete and the compressive strength of structural foam concrete, studied various ratios of solid lime waste to lime waste for more efficient use in the development of new foam concrete building materials and on the basis of laboratory experiments it was found that lime waste (sludge) to foam concrete it can be used as a filler.
В статье обобщены и критически проанализированы данные ученых из разных стран, информация в СМИ, фото и видео материалы о причинах столь катастрофических последствий землетрясений в Турции. Показано, что сейсмостойкость зданий безусловно определяется научно-техническим уровнем применяемых строительных норм и их неукоснительным соблюдением.
Рассмотри! состояние применения различных конструктивных систем зданий, обеспечения качества строительства, соблюдения строительных норм в нашей стране. Формулируются основные напрвления принятия мер по обеспечению сейсмобезопасности зданий и сооружений.
В последнее время на территории Узбекистана происходят события, которые будоражат общественное мнение, подрывают авторитет строительной отрасли и доверие к продуктам её деятельности, - обрушение части 6-этажного строящегося жилого дома в г. Джизак (2021 г.), прорыв дамбы Сардобинского водохранилища (2020 г.), незапланированная осадка 9-ти этажного жилого дома в г. Чирчик (2023 г.), появившиеся трещины в строящемся жилом многоэтажном доме в Ссргслийском районе (2023 г.) и в новостройке Яшнабадского района столицы (2023 г.), обрушение пяти балок строящегося путепровода перед международным аэропортом Ташкента (2023 г.). И это - нс полный список «побед», а только часть, получившая широкое освещение в социальных сетях.
В статье рассмотрены современное состояние исследований по оценке сейсмического риска урбанизированных территорий в Узбекистане и очередные задачи по обеспечению сейсмической безопасности реципиентов в республике.
Стихийные действия сил природы, пока еще не в полной мере подвластные человеку, наносят экономике государства и населению огромный ущерб. Эти явления природы вызывают экстремальные ситуации, нарушают нормальную жизнедеятельность людей и работу объектов. По мере того, как растет население и усиливается урбанизация в населенных сейсмоактивных зонах, растет плотность застройки домов, дорог, мостов, трубопроводов, систем коммуникаций и всего того, что называем инфраструктурой.
This article discusses the effect of a complex additive based on ACF or SAFA plasticizers and SOAPSTON hardener made from oil and fat industry waste on strength, homogeneity, density and the propagation rate of ultrasound in cast concrete
Ushbu maqolada barxan qumini portlandsement tarkibiga mikro to’ldirg’ich sifatida foydalanib, egilishga va siqilishga mustahkamlig natijalari keltirilgan.
Today, with the development of the construction industry, the demand for cement is also increasing. In increasing the volume of construction, cement is one of the resources available at the price of finished objects is achieved through cost reduction due to the use in the construction of modern high-quality building materials and products with lower energy consumption and with improved characteristics. Of particular importance is the production of effective cements based on industrial waste. On a global scale, special attention is paid to the development of new compositions of cements that increase the fire resistance of building structures and the most important task of research in this direction is the development of compositions based on industrial waste for Portland cement. When developing composite additives and based on them new compositions of highly effective composite Portland cement, in this direction it is necessary to substantiate a number of the following scientific solutions, in particular: development of new methods for the production of effective types of building products based on composite additives; development of new compositions for the production of nanocements with the participation of secondary raw materials; increase of concrete strength indicators on sulfate-resistant cements; optimization of the composition of raw materials in obtaining energy saving clinkers and cements; modernization of production technologies for white and decorative Portland cement; to increase the production of auxiliary cements, the use of alternative sources of active mineral additives and filler additives.
In this article was studied the physical and mechanical properties of concrete with superplasticizers of Sika Retarder, as well as the results of laboratory studies were given in the form of the table and graphs.
Ушбу изланишда ички ва ташқи қатламлари композит материаллар билан ўралган ўртасида металл қатламли цилиндрсимон қобиқларнинг узоққа чидамлилиги ва мустаҳкамлиги кўриб чиқилган. Металл қувурлар маьлумки, кислота, ишқор каби агрессив мухитларга чидамсиз бўлади яьни коррозияга учраш натижасида ўзининг мустаҳкамлигини ва узоққа чидамлилигини йўқотади. Металл труба (қувурларнинг) юк кўтариш қобилятлари компазит қувурларникига нисбатан бир неча баровар катта бўлади. Агар юк кўтарувчи қатлам сифатида металл қувирларни танласак ва уларни ички , ташқи қатламларини агрессив муҳитга чидамлик композит материаллар билан ўраб чиқсак, коррозияга чидамлилик ҳам агрессив муҳитларга бардош берадиган ҳамда ташқи динамик ва статик юкларни бемалол кўтарувчи мустаҳкам ва узоққа чидамли резервуарлар ва қувирларни ҳосил қилишимиз мумкин. Бундай цилиндрсимон комбинацяланган уч қатламли қобиқларни мустаҳкамлигини ва устиворлигини ҳисоблашда ҳам анизотроп материалларни ҳамда изотроп материал сифатида металл (пўлат) қобиқларнинг физик-механик хоссаларини ҳисобга олишга тўғри келади.
The article discusses the increase in wear resistance, adhesive strength and physical and mechanical properties of composite thermosetting epoxy polymer materials and coatings based on them for use on working surfaces that form the equipment of architectural and artistic reinforced concrete products
The article presents data on the synthesis of a new super plasticizer based on recycled materials. Data on the effect of superplasticizer on the properties of cement compositions (concrete compositions) are given. Revealed of optimal amounts of superplasticizer in mortars sharply increases the mobility of the solution. Reduces the water consumption of mortar and increases the strength of the composition by 15-20%. The paper also presents data on the cost effectiveness of superplasticizer application.
Промышленное и гражданское строительство входят в группу ключевых направлений развития государства. Данной утверждение основывается, во-первых, на значительных темпах обновления жилищного фонда (введение в действие новых жилых домов). Во вторых, на необходимости активизации промышленности, которой требуются новые высокотехнологичные здания и сооружения, отвечающие современным стандартам безопасности и требованиям заказчиков подобных строек. Такие приоритеты для государства весьма очевидны. Дело в том, что решая проблемы жилья, хотя бы в той мере, что его предложение на рынке неизменно растет, с соответствующими изменениями цен и изменением конкуренции, государство создает условия для решения и социальных проблем. В частности, новые микрорайоны в обязательном порядке должны быть снабжены детскими садами и школами, а о появлении новых магазинов общественного питания и сферы услуг вообще не вызывают сомнений. Выполняются социальные обязательства, формируются условия для развития малого предпринимательства, происходит стимулирование процессов обмена и распределения накоплений населения, т.е. стимулирование экономики и экономического роста. Темпы строительства новых жилых многоквартирных домов на сегодняшний день одни из самых высоких за новейшую историю государства, а качество строений напрямую зависит от эффективности и соблюдения технологий строительства, а также качества и состава материала, из которого оно ведется.
Во всем мире проводятся научные исследования по совершенствованию технологии производства огне- и жаропрочных композиционных портландцементов и бетонов на их основе, в том числе по следующим приоритетным направлениям: разработка новых составов композиционных сырьевых смесей; экономия природных сырьевых ресурсов и применение вторичных сырьевых материалов; разработка энергоэкономичных технологий обжига клинкера; создание состава активных минеральных добавок, обеспечивающих ресурсосберегающую технологию производства портландцемента; разработка технологий производства новых составов добавочных, пуццолановых и цветных портландцементов [1].
The article deals with complex physical and chemical studies of the influence of microfiller on the formation of the structure and properties of lightweight concrete.
The scientific significance of the research results is explained by the determination of the influence of local raw materials and agricultural waste on the phase formation process and structure formation in ceramic wall material, as well as on its physical and mechanical properties and quality indicators under firing conditions
The paper considers interlayer shifts of combined two-layer cylindrical shells made of composite layers differing in thickness and physical and mechanical properties, and also investigates the effect of stress-strain state of such shells on their strength and deformability.
Приведена постановка задачи о продольном взаимодействии подземного магистрального трубопровода с окружающем его грунтом при действии низкочастотных сейсмических волн. Численным решением определены продольные напряжения в трубопроводе в зависимости от жесткости грунта. Установлена, что при больших жесткостях окружающего подземный трубопровод грунта, сейсмическая напряжения трубопровода существенно низкая. На основе этих инновационных результатов предлагается улучшения технологии строительства сейсмостойких подземных магистральных трубопроводов.