Volume 15 Issue 08, August 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
20
TEACHING FUTURE TECHNOLOGY EDUCATION TEACHERS THE SEQUENCE
OF ACTIONS IN THE "VALENTINE" PROGRAM IN A DIGITAL LEARNING
ENVIRONMENT
Ismailova Momogul Hamraboy kizi
Teacher of the department of technological education
Urgench state pedagogical institute
Abstract:
This article states that when working in the "Valentina" program, each user can use
any tools at their discretion when creating a pattern and may use various objects in different
sequences depending on the construction style.
Keywords:
Valentina program, pattern, pattern piece, control points/marks, formulas.
Introduction.
In the program variables between straight away dependency This is the case.
drawings in creation of course in consideration to be taken need. In the program actions clear in
sequence execution marked. Directly dependency this means that the next actions previous
objects for not visible.
Some size to compose algorithms authors this on principle compliance doesn't do it, this and one
how many from the drawing consists of sizes to create impossible to the point In this case, all
calculations one in the drawing done your increase recommendation we do, in this separately
drawings build for conditional basic points our creation need It will be.
In the program this feature pictures using seeing Let's go out.
For example, one with stitches sleeve installable drawing built. Now the sleeve high in the part
( okat along ) freedom ( posadka ) distribution this is necessary and in the drawing sleeve high
point (point B2) harvest was freedom to the amount looking at to move means.
Volume 15 Issue 08, August 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
21
In the drawing, point B2 final status one how many to the parameter, including the Pos_A52
section to the length (in the drawing this points a13 additions with (shown) is related to point B2.
location formulas using designation for the Posa13_A52a13 cross section we create, that is
shown points line with We connect. In the picture this dotted line with separated.
point B2 location determination for the formula Let's define. Formulas edit to the window let's
go :
Volume 15 Issue 08, August 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
22
Formulas edit in the window necessary cut found It didn't happen. This is because is that the
intersection of Posa13_A52a13 is point B2 since creation then drawn. That is, from point B2
before created all objects program sees and from them use possible. But from point B2 then in
the drawing created everyone something programs this point of view from the point of view
according to can't. Here it is on the ground variables between straight away dependency
manifestation will be : Next all actions previous objects for The program are not visible. cut
vision for point it B2 from creating before drawing need was.
Such a situation doesn’t draw one part again not to build for “ History ” (History) from the tab
use This is possible. label his/her own main from duty outside objects construction in the process
to manage, that is drawing construction sequence to change opportunity But " History "
( History ) from the feature only necessity when use recommendation is done, because in this
variables between cyclical dependency to the surface it comes, this program by "not supported."
This action from doing before your file copy save it because unsuccessful attempt in the case of
file broken of staying prevent you will get.
So, " History " (History) section:
“
History ” ( History At the bottom of the ) window, the last action performed by the program is
written — Constructing the section Posa13_A52a13. The arrow to the left of this line points to
Volume 15 Issue 08, August 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
23
the last action performed by the program.
For us, this intersection must be constructed before point V2 is created. For this " History " in the
window V2 build practice we find and arrow one to the position up we will move.
And history ( History ) window without closing standing, this in the drawing necessary cut again
we create (points dotted line with let's combine):
Created incision immediately " History " in the window appearance It was. Only now this action
point V2 from creation before done is considered. So since, point V2 for the formula when
Volume 15 Issue 08, August 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
24
entering, the program this cut sees.
Then, " History " in the window arrow-shaped cursor again previous to the place – the mirror
below, program by last done we will do it and this Click the [OK] button to close the window.
pressing We close.
Now the formulas edit to the window enter the result check possible :
New cut formulas edit in the window reflection Now it is necessary the formula create for use
possible.
References
1.«Valentina» (Valentina) is a program for creating and modeling formal clothes by Roman
Telezhinsky, Olga Krasnyashchikh. [c. 1.33]
2. S.I. Sharipova, D.F. Jalolova "Automated system for designing sewing products" Textbook -
Tashkent: 2021.- 124 p.
3. Surikova GI Proektirovanie raskladok lekal detaile odejdy v SAPR: Uchebnoe posobie / GI
Surikova, MV Surikova, OV Surikova, Ivanovo: IGTA, 2005. - 152 p.
4. Masalova VA Konstruktivnoe modelirovanie odejdy pervogo vida (s ipolzovaniem CAD
AutoCAD): Metod.posobie / Masalova VA, Maslova EG – M.: IITS MGUDT, 2006. – 17p.
5. Z. Davletsheva. Sewing their belongings preparation technology. Educational manual.
Tashkent "Sano Standart " publishing house, 2017.
6. S.Tashpulatov, F.Alqarov, G.Alimova, Z.Khaqnazarova, B.Mukhtorov, SG'ofurova. Clothes
on the computer design foundations. T.,"Science " Ziya ". 2014.
7. D. Tkachev. Automatic AutoCAD. 2004. ZAO. Izdatelsky Center " Academy ". 2010. 176 p.
